Skip to main content

Sunrise Panel DRESS!

I think every year, I have one project that pisses me off sooooo much that I just end up in tears and throwing it across the room at some point or another. Last year it was the Cloud Dress (which isn't difficult at all) and this year it was this dress!

At some point, the zipper just decided I needed to completely rip it out. Lucky for me, I had adjustments to make on the entire dress. This dress is definitely NOT HARD to sew, but that stupid zipper still made me much more upset than I ever needed to be.

I can't tell you how many zippers I have sewn in my life: probably around 100? Maybe less? I have a technique down but all the hand-basting, pressing, going slow in the world wouldn't get this one to not bunch. Ok, I lied - it looks quite alright now.


I always do a lapped zipper due to the fact that I can't find any invisible zippers that are more than 24" long in stores. I always forget to look on the internet for them and by the time I need them, I'm to the zipper part on something and say, "Oh, a regular zipper is just fine."

I'm still not entirely happy with my un-even gathering-ness which semi-look like pleats, but it'll do for now. Argh, this was a tough one. I even staggered the spacing of the basting stitches to make even gathers correctly. So.... I do know the correct technique, I apparently just can't make my hands do the work.

The lining inside the top (which is bubblegum pink like the outer panel) is hand-stitched inside there so it's going to be a super-pain to really fix someday. I spent about 4 extra hours re-working and refining details.

If this dress looks familiar, that's because it's based on the Sunrise Panel Top!  This was actually my most-viewed garment ever on any site. Though when I made this dress, I figured out some issues that weren't immediately apparent on my last go-round of this pattern.

1.) I needed to cut off 1/2" at the shoulders to get the bust to sit at the correct spot. I think my original blocks are just made for someone with a longer body. So yeah, I had to bust apart about 4 seams to get back in there to edit that, then the shoulder seams weren't sewing together nicely since the fabric was unraveling 2.) When I extended the pattern, DUH! A bodice block ends at your natural waist, hence a straight but slightly angled inward line. What happens when you go below your natural waist? Ever hear of an hourglass figure, Nicole?! You guessed it: The pattern needs to jut outward again from that point.

If I had used my torso block, that wouldn't have even been an issue. I tend to overlook small details, no matter how long I've been making things for.

In the end, I did end up with finally figuring out exactly how to work my blocks for just me with prototypes so I won't have another slightly-oversized phenomenon like the Tower Midi. This is something they don't teach you in fashion design school, kids!

The inside pockets are perfectly-sized and I love the colors of this one. This dress actually replaces the Ana Flounce Dress I had originally intended upon making for my 5-piece dress collection. I just think this one is far more fun. Next time, I'll be putting elastic behind the waist area for perfect gathers. That's always worked for me.

This is also the design I intend upon releasing as a PDF pattern in 2014. Lots Illustrator re-learning to happen before that's a reality, but I can do it. I'm actually planning on going moreso the way of releasing PDF patterns versus selling my wares. I have a few places that actually have approached me about picking up my pattern designs when I finally do release them. I never expected that! Really flattered and honored.

Also, if you've been paying attention to my Instagram account (@uniko509) you'll also see that I made this top out of the mod faces fabric I bought from Etsy not too long ago!

About 2 hours, patternmaking and sewing. Definitely fastest yet. I might alter the pattern for another run of it where the flare starts a little higher up, but it looks much more flare-y on me than this dressform somehow. This fabric is a one-way stretch knit which wears and sews up pretty nicely.

I actually plan on wearing this to the Lomo show where my fashion design work will be featured for a bit. This show is to release a new La Sardina camera and I was invited to help launch it! The opening night is August 10th in Chicago. Any Chicago readers, feel free to stop by that night and say hello! I'll have almost all my dress projects up from 2012 and 2013!

Moral of the story: Have fun, and don't let your semi-failures get you down. Just because you're not 100% perfect on everything doesn't mean that you can't get somewhere with it.

The things that cause you the most trouble are the things you learn from the most in life.

Comments

  1. i love that you "make" your own fabric out of stitching panels together. I've never tried splitting up a pattern to do this. Is it very hard to calculate?
    I've had some dresses in the past where there has been too many gathers at the back - which made me look a little voluptuous back there, so i had to undo the zipper and stitching. How frustrating!

    ReplyDelete
    Replies
    1. It's not hard at all! Perhaps that will be an upcoming blog post, just for you! The only thing you have to pay attention to are darts, but I'll explain how that works out.

      Delete
  2. The zipper looks great, quit beating yourself up! :)
    When creating this type of bodice, is the dart control in the seams? I'm grasping an understanding of how that works, but you make it look so simple! And congrats on your work being featured at the show! That's freakin awesome!!

    ReplyDelete
    Replies
    1. Yes, you are correct about the pattern making! Cat asked about this too, so I think I will do a blog on this. What I started with was making my bodice block into an armhole princess style line so I wouldn't have to move around the darts. After that, I drew my design lines where I wanted the seams and added seam allowance. You can see how I mimicked the shape of the armhole princess on the added style lines.

      I'll do a post on it and show photos of the process eventually. Right now, I'm kind of running around like a chicken with my head cut off about this show, but yes, it is awesome!

      Delete

Post a Comment

Popular posts from this blog

Latch Hook Rug Update

A little under a month ago I received all of my supplies to take on one of the biggest long-term projects I have ever taken on - a self-designed latch hook rug. I don't know why, but I am clearly nuts. So beginning today I am posting photos each month, (preferably on the 1st of each month) progress of this gigantic shag rug. See how I started it here (scroll down past posting of my $10 dress).  This is a photo of it today:  Yes, I used the candelabra for scale. Haha.   This rug is really soft and is fun to run your fingers through.  It doesn't look like much was accomplished, but though the number of packages we have gone through of pre-cut latch hook rug yarn already I have calculated that  we've used over 2500 strands for this ie.) 8 packages. I also just ordered 10 more packages of lime green since that's what I ran out of first and 6 more packages of straw yellow. There is still quite a bit to go, but you see the blue row squares? Each of th

DIY Trapeze Dress

I'm a pretty big fan of tent dresses (or trapeze dresses - call it what you want). They're simple, easy-to-make and you can have many variations of them. These are a fun style to wear for spring and summer!  See this DIY from a Good Housekeeping Crafts book from 1971 - photos at the end of my own trapeze top from a while ago! (Bear with me on the photos here - this book is quite cumbersome and hard to scan.)  Applique patterns, in case you wanted the dress to look EXACTLY like the photo. (But why?)  How to cut the fabric efficiently. (This is actually pretty important cost-wise for you - especially with something this big.)  Using pattern instructions from my patternmaking book from college, I created this swingy trapeze top a bit ago. I used sweater fabric from a thrift store find for the collar of this top.   I also opened up the back on the pattern to have a diamond shape.   It can easily be belted like in this photo fo

Shingo Sato and the Art of Transformational Reconstruction

So I got really excited on my break at work today when I got an email from Burda about a webinar they're doing on a pattern technique called "Transformational Reconstruction" developed by Japanese designer Shingo Sato. I hadn't even heard of Shingo Sato until today let alone his design technique but oddly, it's sort of the path I'm going down with my designs anyway as seen with the Sunrise Panel dress as well as the Petra Dress and the pattern making involved in those designs. What I did there is perhaps a "light" version of Sato's where the darts and shaping are hidden in the seam lines. If you've been reading this blog long enough, you know that my design aesthetic focuses largely on color blocking, unusual seam lines, and a love of anything psychedelic. Note: All photos stolen from the internet. Sorry! I'm super-excited. Let me know if it's yours and I'll take it down.  Shingo Sato teaching.  More designs using